jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c2 2.54mm pitch high density connector a1 and a2 series features 1. high density mounting connectors are aligned in the longitudinal direction on the 2.54 mm mesh board, so that no idle space can occur. 2. variation in number of contacts the a1 series contains 16 types of 6 to 64 contacts, while the a2 series contains 20 types of 1 to 20 contacts, 3. compatibility the a1 series is compatible with hif3b series cable side and hif3h receptacle for wide applications. note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. ? 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7 . operating life contact resistance: 15m ohms max. 500 cycles 8 . resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 350? for 3 seconds applications computers, vtr, and other various kinds of electronic equipment product specifications current rating: 3a voltage rating: 200v ac operating temperature range: -55 to +85 ? (note 1) operating moisture range: 40 to 80% storage temperature range: -10 to +60 ? (note 2) storage humidity range: 40 to 70% (note 2) rating material part material finish remarks insulator pbt black ul94v-0 pin header contact brass contact area : gold plated ??????? dip area : tin plated crimping socket polyamid black ul94v-0 crimping contact phosphor bronze contact area : gold plated ??????? termination area : nickel plated the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c3 a1 and a2 series 2.54mm pitch high density connector ordering information q series name: a w series no.:1 (double row) 2 (single row) e number of contacts: a1...6, 8, 10, 12, 14, 16, 20, 24, 26, 34, 40, 50, 60, 64 a2...1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 r p: pin header t a: selective gold plated y contact pitch : 2.54mm u contact type: ds : right angle type dsa : straight type k pin header a 1 - 6 p a - 2.54 ds qr e wt y q series name : a w series no. : 1 (double row) 2 (single row) e number of contacts: a1 : 8, 10, 12 a2 : 5, 6 r contact alignment : a1 : d (double row) a2 : s (single row) t contact pitch : 2.54mm y connection type: c : crimping k crimping socket a 1 - 12 d - 2.54 c qt er wy q series name : a w series no. : 1 e applicable cable size 2226: awg#22~ awg#26 2630: awg#26~ awg#30 r packaging type scfc : reel scc : bag k crimping contact a 1 - 2630 - scfc q er w u the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c4 a1 and a2 series 2.54mm pitch high density connector a1 (double row)- right angle type b pcb mounting pattern part number cl no. unit: mm a1- 0 6pa-2.54ds(71) a1- 0 8pa-2.54ds(71) a1-10pa-2.54ds(71) a1-12pa-2.54ds(71) a1-14pa-2.54ds(71) a1-16pa-2.54ds(71) a1-18pa-2.54ds(71) a1-20pa-2.54ds(71) 619-0001-7-71 619-0016-4-71 619-0002-0-71 619-0003-2-71 619-0004-5-71 619-0005-8-71 619-0006-0-71 619-0007-3-71 6 8 10 12 14 16 18 20 0 7.62 10.16 12.70 15.24 17.78 20.32 22.86 25.40 0 5.08 0 7.62 10.16 12.70 15.24 17.78 20.32 22.86 yes number of contacts a b rohs part number cl no. unit: mm a1-26pa-2.54ds (71) a1-30pa-2.54ds (71) a1-34pa-2.54ds (71) a1-40pa-2.54ds (71) a1-50pa-2.54ds (71) a1-60pa-2.54ds (71) a1-64pa-2.54ds (71) 619-0009-9-71 619-0010-8-71 619-0011-0-71 619-0012-3-71 619-0013-6-71 619-0014-9-71 619-0015-1-71 26 30 34 40 50 60 64 33.02 38.10 43.18 50.80 63.50 76.20 81.28 number of contacts a 30.48 35.56 40.64 48.26 60.96 73.66 78.74 yes b rohs note: right side and left side rib is added for 34pos, or more. 2.540.05 b0.1 2.540.05 ?0.8 +0.1 0 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c5 a1 and a2 series 2.54mm pitch high density connector a1 (double row)- straight type b pcb mounting pattern 2.540.05 b0.1 2.540.05 ?0.8 +0.1 0 unit: mm part number a1- 0 6pa-2.54dsa(71) a1- 0 8pa-2.54dsa(71) a1-10pa-2.54dsa(71) a1-12pa-2.54dsa(71) a1-14pa-2.54dsa(71) a1-16pa-2.54dsa(71) a1-18pa-2.54dsa(71) a1-20pa-2.54dsa(71) a1-24pa-2.54dsa(71) a1-26pa-2.54dsa(71) a1-30pa-2.54dsa(71) a1-34pa-2.54dsa(71) a1-40pa-2.54dsa(71) a1-50pa-2.54dsa(71) a1-60pa-2.54dsa(71) a1-64pa-2.54dsa(71) cl no. 619-0021-4-71 619-0037-4-71 619-0022-7-71 619-0023-0-71 619-0024-2-71 619-0025-5-71 619-0026-8-71 619-0027-0-71 619-0028-3-71 619-0029-6-71 619-0030-5-71 619-0031-8-71 619-0032-0-71 619-0033-3-71 619-0034-6-71 619-0035-9-71 number of contacts a 6 8 10 12 14 16 18 20 24 26 30 34 40 50 60 64 0 7.32 0 9.86 12.40 14.94 17.48 20.02 22.56 25.10 30.18 32.72 37.80 42.88 50.50 63.20 75.9 0 80.98 b rohs 0 5.08 0 7.62 10.16 12.70 15.24 17.78 20.32 22.86 27.94 30.48 35.56 40.64 48.26 60.96 73.66 78.74 yes the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c6 a1 and a2 series 2.54mm pitch high density connector a2 (single row)-dip type part number a2- 0 1pa-2.54dsa(71) a2- 0 2pa-2.54dsa(71) a2- 0 3pa-2.54dsa(71) a2- 0 4pa-2.54dsa(71) a2- 0 5pa-2.54dsa(71) a2- 0 6pa-2.54dsa(71) a2- 0 7pa-2.54dsa(71) a2- 0 8pa-2.54dsa(71) a2- 0 9pa-2.54dsa(71) a2-10pa-2.54dsa(71) a2-11pa-2.54dsa(71) a2-12pa-2.54dsa(71) a2-13pa-2.54dsa(71) a2-14pa-2.54dsa(71) a2-15pa-2.54dsa(71) a2-16pa-2.54dsa(71) a2-17pa-2.54dsa(71) a2-18pa-2.54dsa(71) a2-19pa-2.54dsa(71) a2-20pa-2.54dsa(71) cl no. 620-0051-5-71 620-0052-8-71 620-0053-0-71 620-0054-3-71 620-0055-6-71 620-0056-9-71 620-0057-1-71 620-0058-4-71 620-0059-7-71 620-0060-6-71 620-0061-9-71 620-0062-1-71 620-0063-4-71 620-0064-7-71 620-0065-0-71 620-0066-2-71 620-0067-5-71 620-0068-8-71 620-0069-0-71 620-0070-0-71 number of contacts 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 a ? 0 2.54 0 5.08 0 7.62 10.16 12.70 15.24 17.78 20.30 22.86 25.40 27.94 30.48 33.02 35.56 38.10 40.64 43.18 45.72 48.26 yes b rohs 0 2.24 0 4.78 0 7.32 0 9.86 12.40 14.94 17.48 20.02 22.56 25.10 27.64 30.18 32.72 35.26 37.80 40.34 42.88 45.42 47.96 50.50 k straight type part number a2- 0 1pa-2.54ds(71) a2- 0 2pa-2.54ds(71) a2- 0 3pa-2.54ds(71) a2- 0 4pa-2.54ds(71) a2- 0 5pa-2.54ds(71) a2- 0 6pa-2.54ds(71) a2- 0 7pa-2.54ds(71) a2- 0 8pa-2.54ds(71) a2- 0 9pa-2.54ds(71) a2-10pa-2.54ds(71) a2-11pa-2.54ds(71) a2-12pa-2.54ds(71) a2-13pa-2.54ds(71) a2-14pa-2.54ds(71) a2-15pa-2.54ds(71) a2-16pa-2.54ds(71) a2-17pa-2.54ds(71) a2-18pa-2.54ds(71) a2-19pa-2.54ds(71) a2-20pa-2.54ds(71) cl no. 620-0001-7-71 620-0002-0-71 620-0003-2-71 620-0004-5-71 620-0005-8-71 620-0006-0-71 620-0007-3-71 620-0008-6-71 620-0009-9-71 620-0010-8-71 620-0011-0-71 620-0012-3-71 620-0013-6-71 620-0014-9-71 620-0015-1-71 620-0016-4-71 620-0017-7-71 620-0018-0-71 620-0019-2-71 620-0020-1-71 number of contacts 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 a b rohs 0 2.24 0 4.78 0 7.32 0 9.86 12.40 14.94 17.48 20.02 22.56 25.10 27.64 30.18 32.72 35.26 37.80 40.34 42.88 45.42 47.96 50.50 ? 0 2.54 0 5.08 0 7.62 10.16 12.70 15.24 17.78 20.30 22.86 25.40 27.94 30.48 33.02 35.56 38.10 40.64 43.18 45.72 48.26 yes k right angle type k straight type k right angle type unit: mm unit: mm b pcb mounting pattern 2.540.05 b0.1 ?0.8 +0.1 0 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c7 a1 and a2 series 2.54mm pitch high density connector crimping socket k double row type k single row type part number a1- 0 8d-2.54c a1-10d-2.54c a1-12d-2.54c cl no. 619-0093-5 619-0091-0 619-0092-2 a b rohs 10.16 12.70 15.24 0 7.62 10.16 12.70 yes a1- * d-2.54c part number a2-5s-2.54c a2-6s-2.54c cl no. 620-0101-1 620-0102-4 a b rohs 12.70 15.24 10.16 12.70 yes a2- * s-2.54c the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c8 a1 and a2 series 2.54mm pitch high density connector crimping contact polarizing key crimping tools manual crimping tool crimper unit applicator hif3-tb2226hc hif3-tb2630hc cm-105 ap105-a1-2226s ap105-a1-2630s 550-0154-1 550-0155-4 901-0005-4 901-4008-4 901-4009-7 a1-2226scc a1-2630scc ????????? a1-2226scfc a1-2630scfc awg#22 to #26 awg#26 to #30 ????????? ????????? ????????? part number part number cl no. applicable contact applicable cable a1-2226scfc a1-2226scc a1-2630scfc a1-2630scc cl no. 619-0211-0 619-0214-8 619-0212-2 619-0215-0 applicable cable awg # 22 to # 26 awg # 26 to # 30 1.80 1.80 1.35 1.35 1.8 1.8 1.4 1.4 0.8 0.8 0.8 0.8 a b c d e f rohs 11.5 11.5 11.5 11.5 quantity 10,000 100 10,000 100 packaging type reel bag reel bag 2.3 2.3 2.0 2.0 2.6 2.6 2.1 2.1 yes scc contact hif3-gpin ( a ) scfc contact part number hif3-gpin(a) cl no. 562-0126-6 material remarks poly acetal (white) 5 pieces set packaging rohs 4 sets yes gold plated area gold plated area the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. powered by tcpdf (www.tcpdf.org) c9 a1 and a2 series 2.54mm pitch high density connector short pin performance part number hif3ga-2.54sp cl no. rohs 562-0403-4 yes item contact resistance insulation resistance current rating rating value 30m ohms max. at 0.1a dc 1000m ohms min. at 500v dc 3a the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c2 2.54mm pitch high density connector a1 and a2 series features 1. high density mounting connectors are aligned in the longitudinal direction on the 2.54 mm mesh board, so that no idle space can occur. 2. variation in number of contacts the a1 series contains 16 types of 6 to 64 contacts, while the a2 series contains 20 types of 1 to 20 contacts, 3. compatibility the a1 series is compatible with hif3b series cable side and hif3h receptacle for wide applications. note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. ? 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7 . operating life contact resistance: 15m ohms max. 500 cycles 8 . resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 350? for 3 seconds applications computers, vtr, and other various kinds of electronic equipment product specifications current rating: 3a voltage rating: 200v ac operating temperature range: -55 to +85 ? (note 1) operating moisture range: 40 to 80% storage temperature range: -10 to +60 ? (note 2) storage humidity range: 40 to 70% (note 2) rating material part material finish remarks insulator pbt black ul94v-0 pin header contact brass contact area : gold plated ??????? dip area : tin plated crimping socket polyamid black ul94v-0 crimping contact phosphor bronze contact area : gold plated ??????? termination area : nickel plated the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c3 a1 and a2 series 2.54mm pitch high density connector ordering information q series name: a w series no.:1 (double row) 2 (single row) e number of contacts: a1...6, 8, 10, 12, 14, 16, 20, 24, 26, 34, 40, 50, 60, 64 a2...1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 r p: pin header t a: selective gold plated y contact pitch : 2.54mm u contact type: ds : right angle type dsa : straight type k pin header a 1 - 6 p a - 2.54 ds qr e wt y q series name : a w series no. : 1 (double row) 2 (single row) e number of contacts: a1 : 8, 10, 12 a2 : 5, 6 r contact alignment : a1 : d (double row) a2 : s (single row) t contact pitch : 2.54mm y connection type: c : crimping k crimping socket a 1 - 12 d - 2.54 c qt er wy q series name : a w series no. : 1 e applicable cable size 2226: awg#22~ awg#26 2630: awg#26~ awg#30 r packaging type scfc : reel scc : bag k crimping contact a 1 - 2630 - scfc q er w u the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c4 a1 and a2 series 2.54mm pitch high density connector a1 (double row)- right angle type b pcb mounting pattern part number cl no. unit: mm a1- 0 6pa-2.54ds(71) a1- 0 8pa-2.54ds(71) a1-10pa-2.54ds(71) a1-12pa-2.54ds(71) a1-14pa-2.54ds(71) a1-16pa-2.54ds(71) a1-18pa-2.54ds(71) a1-20pa-2.54ds(71) 619-0001-7-71 619-0016-4-71 619-0002-0-71 619-0003-2-71 619-0004-5-71 619-0005-8-71 619-0006-0-71 619-0007-3-71 6 8 10 12 14 16 18 20 0 7.62 10.16 12.70 15.24 17.78 20.32 22.86 25.40 0 5.08 0 7.62 10.16 12.70 15.24 17.78 20.32 22.86 yes number of contacts a b rohs part number cl no. unit: mm a1-26pa-2.54ds (71) a1-30pa-2.54ds (71) a1-34pa-2.54ds (71) a1-40pa-2.54ds (71) a1-50pa-2.54ds (71) a1-60pa-2.54ds (71) a1-64pa-2.54ds (71) 619-0009-9-71 619-0010-8-71 619-0011-0-71 619-0012-3-71 619-0013-6-71 619-0014-9-71 619-0015-1-71 26 30 34 40 50 60 64 33.02 38.10 43.18 50.80 63.50 76.20 81.28 number of contacts a 30.48 35.56 40.64 48.26 60.96 73.66 78.74 yes b rohs note: right side and left side rib is added for 34pos, or more. 2.540.05 b0.1 2.540.05 ?0.8 +0.1 0 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c5 a1 and a2 series 2.54mm pitch high density connector a1 (double row)- straight type b pcb mounting pattern 2.540.05 b0.1 2.540.05 ?0.8 +0.1 0 unit: mm part number a1- 0 6pa-2.54dsa(71) a1- 0 8pa-2.54dsa(71) a1-10pa-2.54dsa(71) a1-12pa-2.54dsa(71) a1-14pa-2.54dsa(71) a1-16pa-2.54dsa(71) a1-18pa-2.54dsa(71) a1-20pa-2.54dsa(71) a1-24pa-2.54dsa(71) a1-26pa-2.54dsa(71) a1-30pa-2.54dsa(71) a1-34pa-2.54dsa(71) a1-40pa-2.54dsa(71) a1-50pa-2.54dsa(71) a1-60pa-2.54dsa(71) a1-64pa-2.54dsa(71) cl no. 619-0021-4-71 619-0037-4-71 619-0022-7-71 619-0023-0-71 619-0024-2-71 619-0025-5-71 619-0026-8-71 619-0027-0-71 619-0028-3-71 619-0029-6-71 619-0030-5-71 619-0031-8-71 619-0032-0-71 619-0033-3-71 619-0034-6-71 619-0035-9-71 number of contacts a 6 8 10 12 14 16 18 20 24 26 30 34 40 50 60 64 0 7.32 0 9.86 12.40 14.94 17.48 20.02 22.56 25.10 30.18 32.72 37.80 42.88 50.50 63.20 75.9 0 80.98 b rohs 0 5.08 0 7.62 10.16 12.70 15.24 17.78 20.32 22.86 27.94 30.48 35.56 40.64 48.26 60.96 73.66 78.74 yes the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c6 a1 and a2 series 2.54mm pitch high density connector a2 (single row)-dip type part number a2- 0 1pa-2.54dsa(71) a2- 0 2pa-2.54dsa(71) a2- 0 3pa-2.54dsa(71) a2- 0 4pa-2.54dsa(71) a2- 0 5pa-2.54dsa(71) a2- 0 6pa-2.54dsa(71) a2- 0 7pa-2.54dsa(71) a2- 0 8pa-2.54dsa(71) a2- 0 9pa-2.54dsa(71) a2-10pa-2.54dsa(71) a2-11pa-2.54dsa(71) a2-12pa-2.54dsa(71) a2-13pa-2.54dsa(71) a2-14pa-2.54dsa(71) a2-15pa-2.54dsa(71) a2-16pa-2.54dsa(71) a2-17pa-2.54dsa(71) a2-18pa-2.54dsa(71) a2-19pa-2.54dsa(71) a2-20pa-2.54dsa(71) cl no. 620-0051-5-71 620-0052-8-71 620-0053-0-71 620-0054-3-71 620-0055-6-71 620-0056-9-71 620-0057-1-71 620-0058-4-71 620-0059-7-71 620-0060-6-71 620-0061-9-71 620-0062-1-71 620-0063-4-71 620-0064-7-71 620-0065-0-71 620-0066-2-71 620-0067-5-71 620-0068-8-71 620-0069-0-71 620-0070-0-71 number of contacts 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 a ? 0 2.54 0 5.08 0 7.62 10.16 12.70 15.24 17.78 20.30 22.86 25.40 27.94 30.48 33.02 35.56 38.10 40.64 43.18 45.72 48.26 yes b rohs 0 2.24 0 4.78 0 7.32 0 9.86 12.40 14.94 17.48 20.02 22.56 25.10 27.64 30.18 32.72 35.26 37.80 40.34 42.88 45.42 47.96 50.50 k straight type part number a2- 0 1pa-2.54ds(71) a2- 0 2pa-2.54ds(71) a2- 0 3pa-2.54ds(71) a2- 0 4pa-2.54ds(71) a2- 0 5pa-2.54ds(71) a2- 0 6pa-2.54ds(71) a2- 0 7pa-2.54ds(71) a2- 0 8pa-2.54ds(71) a2- 0 9pa-2.54ds(71) a2-10pa-2.54ds(71) a2-11pa-2.54ds(71) a2-12pa-2.54ds(71) a2-13pa-2.54ds(71) a2-14pa-2.54ds(71) a2-15pa-2.54ds(71) a2-16pa-2.54ds(71) a2-17pa-2.54ds(71) a2-18pa-2.54ds(71) a2-19pa-2.54ds(71) a2-20pa-2.54ds(71) cl no. 620-0001-7-71 620-0002-0-71 620-0003-2-71 620-0004-5-71 620-0005-8-71 620-0006-0-71 620-0007-3-71 620-0008-6-71 620-0009-9-71 620-0010-8-71 620-0011-0-71 620-0012-3-71 620-0013-6-71 620-0014-9-71 620-0015-1-71 620-0016-4-71 620-0017-7-71 620-0018-0-71 620-0019-2-71 620-0020-1-71 number of contacts 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 a b rohs 0 2.24 0 4.78 0 7.32 0 9.86 12.40 14.94 17.48 20.02 22.56 25.10 27.64 30.18 32.72 35.26 37.80 40.34 42.88 45.42 47.96 50.50 ? 0 2.54 0 5.08 0 7.62 10.16 12.70 15.24 17.78 20.30 22.86 25.40 27.94 30.48 33.02 35.56 38.10 40.64 43.18 45.72 48.26 yes k right angle type k straight type k right angle type unit: mm unit: mm b pcb mounting pattern 2.540.05 b0.1 ?0.8 +0.1 0 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c7 a1 and a2 series 2.54mm pitch high density connector crimping socket k double row type k single row type part number a1- 0 8d-2.54c a1-10d-2.54c a1-12d-2.54c cl no. 619-0093-5 619-0091-0 619-0092-2 a b rohs 10.16 12.70 15.24 0 7.62 10.16 12.70 yes a1- * d-2.54c part number a2-5s-2.54c a2-6s-2.54c cl no. 620-0101-1 620-0102-4 a b rohs 12.70 15.24 10.16 12.70 yes a2- * s-2.54c the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c8 a1 and a2 series 2.54mm pitch high density connector crimping contact polarizing key crimping tools manual crimping tool crimper unit applicator hif3-tb2226hc hif3-tb2630hc cm-105 ap105-a1-2226s ap105-a1-2630s 550-0154-1 550-0155-4 901-0005-4 901-4008-4 901-4009-7 a1-2226scc a1-2630scc ????????? a1-2226scfc a1-2630scfc awg#22 to #26 awg#26 to #30 ????????? ????????? ????????? part number part number cl no. applicable contact applicable cable a1-2226scfc a1-2226scc a1-2630scfc a1-2630scc cl no. 619-0211-0 619-0214-8 619-0212-2 619-0215-0 applicable cable awg # 22 to # 26 awg # 26 to # 30 1.80 1.80 1.35 1.35 1.8 1.8 1.4 1.4 0.8 0.8 0.8 0.8 a b c d e f rohs 11.5 11.5 11.5 11.5 quantity 10,000 100 10,000 100 packaging type reel bag reel bag 2.3 2.3 2.0 2.0 2.6 2.6 2.1 2.1 yes scc contact hif3-gpin ( a ) scfc contact part number hif3-gpin(a) cl no. 562-0126-6 material remarks poly acetal (white) 5 pieces set packaging rohs 4 sets yes gold plated area gold plated area the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. powered by tcpdf (www.tcpdf.org) c9 a1 and a2 series 2.54mm pitch high density connector short pin performance part number hif3ga-2.54sp cl no. rohs 562-0403-4 yes item contact resistance insulation resistance current rating rating value 30m ohms max. at 0.1a dc 1000m ohms min. at 500v dc 3a the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c2 2.54mm pitch high density connector a1 and a2 series features 1. high density mounting connectors are aligned in the longitudinal direction on the 2.54 mm mesh board, so that no idle space can occur. 2. variation in number of contacts the a1 series contains 16 types of 6 to 64 contacts, while the a2 series contains 20 types of 1 to 20 contacts, 3. compatibility the a1 series is compatible with hif3b series cable side and hif3h receptacle for wide applications. note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. ? 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7 . operating life contact resistance: 15m ohms max. 500 cycles 8 . resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 350? for 3 seconds applications computers, vtr, and other various kinds of electronic equipment product specifications current rating: 3a voltage rating: 200v ac operating temperature range: -55 to +85 ? (note 1) operating moisture range: 40 to 80% storage temperature range: -10 to +60 ? (note 2) storage humidity range: 40 to 70% (note 2) rating material part material finish remarks insulator pbt black ul94v-0 pin header contact brass contact area : gold plated ??????? dip area : tin plated crimping socket polyamid black ul94v-0 crimping contact phosphor bronze contact area : gold plated ??????? termination area : nickel plated the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c3 a1 and a2 series 2.54mm pitch high density connector ordering information q series name: a w series no.:1 (double row) 2 (single row) e number of contacts: a1...6, 8, 10, 12, 14, 16, 20, 24, 26, 34, 40, 50, 60, 64 a2...1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 r p: pin header t a: selective gold plated y contact pitch : 2.54mm u contact type: ds : right angle type dsa : straight type k pin header a 1 - 6 p a - 2.54 ds qr e wt y q series name : a w series no. : 1 (double row) 2 (single row) e number of contacts: a1 : 8, 10, 12 a2 : 5, 6 r contact alignment : a1 : d (double row) a2 : s (single row) t contact pitch : 2.54mm y connection type: c : crimping k crimping socket a 1 - 12 d - 2.54 c qt er wy q series name : a w series no. : 1 e applicable cable size 2226: awg#22~ awg#26 2630: awg#26~ awg#30 r packaging type scfc : reel scc : bag k crimping contact a 1 - 2630 - scfc q er w u the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c4 a1 and a2 series 2.54mm pitch high density connector a1 (double row)- right angle type b pcb mounting pattern part number cl no. unit: mm a1- 0 6pa-2.54ds(71) a1- 0 8pa-2.54ds(71) a1-10pa-2.54ds(71) a1-12pa-2.54ds(71) a1-14pa-2.54ds(71) a1-16pa-2.54ds(71) a1-18pa-2.54ds(71) a1-20pa-2.54ds(71) 619-0001-7-71 619-0016-4-71 619-0002-0-71 619-0003-2-71 619-0004-5-71 619-0005-8-71 619-0006-0-71 619-0007-3-71 6 8 10 12 14 16 18 20 0 7.62 10.16 12.70 15.24 17.78 20.32 22.86 25.40 0 5.08 0 7.62 10.16 12.70 15.24 17.78 20.32 22.86 yes number of contacts a b rohs part number cl no. unit: mm a1-26pa-2.54ds (71) a1-30pa-2.54ds (71) a1-34pa-2.54ds (71) a1-40pa-2.54ds (71) a1-50pa-2.54ds (71) a1-60pa-2.54ds (71) a1-64pa-2.54ds (71) 619-0009-9-71 619-0010-8-71 619-0011-0-71 619-0012-3-71 619-0013-6-71 619-0014-9-71 619-0015-1-71 26 30 34 40 50 60 64 33.02 38.10 43.18 50.80 63.50 76.20 81.28 number of contacts a 30.48 35.56 40.64 48.26 60.96 73.66 78.74 yes b rohs note: right side and left side rib is added for 34pos, or more. 2.540.05 b0.1 2.540.05 ?0.8 +0.1 0 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c5 a1 and a2 series 2.54mm pitch high density connector a1 (double row)- straight type b pcb mounting pattern 2.540.05 b0.1 2.540.05 ?0.8 +0.1 0 unit: mm part number a1- 0 6pa-2.54dsa(71) a1- 0 8pa-2.54dsa(71) a1-10pa-2.54dsa(71) a1-12pa-2.54dsa(71) a1-14pa-2.54dsa(71) a1-16pa-2.54dsa(71) a1-18pa-2.54dsa(71) a1-20pa-2.54dsa(71) a1-24pa-2.54dsa(71) a1-26pa-2.54dsa(71) a1-30pa-2.54dsa(71) a1-34pa-2.54dsa(71) a1-40pa-2.54dsa(71) a1-50pa-2.54dsa(71) a1-60pa-2.54dsa(71) a1-64pa-2.54dsa(71) cl no. 619-0021-4-71 619-0037-4-71 619-0022-7-71 619-0023-0-71 619-0024-2-71 619-0025-5-71 619-0026-8-71 619-0027-0-71 619-0028-3-71 619-0029-6-71 619-0030-5-71 619-0031-8-71 619-0032-0-71 619-0033-3-71 619-0034-6-71 619-0035-9-71 number of contacts a 6 8 10 12 14 16 18 20 24 26 30 34 40 50 60 64 0 7.32 0 9.86 12.40 14.94 17.48 20.02 22.56 25.10 30.18 32.72 37.80 42.88 50.50 63.20 75.9 0 80.98 b rohs 0 5.08 0 7.62 10.16 12.70 15.24 17.78 20.32 22.86 27.94 30.48 35.56 40.64 48.26 60.96 73.66 78.74 yes the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c6 a1 and a2 series 2.54mm pitch high density connector a2 (single row)-dip type part number a2- 0 1pa-2.54dsa(71) a2- 0 2pa-2.54dsa(71) a2- 0 3pa-2.54dsa(71) a2- 0 4pa-2.54dsa(71) a2- 0 5pa-2.54dsa(71) a2- 0 6pa-2.54dsa(71) a2- 0 7pa-2.54dsa(71) a2- 0 8pa-2.54dsa(71) a2- 0 9pa-2.54dsa(71) a2-10pa-2.54dsa(71) a2-11pa-2.54dsa(71) a2-12pa-2.54dsa(71) a2-13pa-2.54dsa(71) a2-14pa-2.54dsa(71) a2-15pa-2.54dsa(71) a2-16pa-2.54dsa(71) a2-17pa-2.54dsa(71) a2-18pa-2.54dsa(71) a2-19pa-2.54dsa(71) a2-20pa-2.54dsa(71) cl no. 620-0051-5-71 620-0052-8-71 620-0053-0-71 620-0054-3-71 620-0055-6-71 620-0056-9-71 620-0057-1-71 620-0058-4-71 620-0059-7-71 620-0060-6-71 620-0061-9-71 620-0062-1-71 620-0063-4-71 620-0064-7-71 620-0065-0-71 620-0066-2-71 620-0067-5-71 620-0068-8-71 620-0069-0-71 620-0070-0-71 number of contacts 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 a ? 0 2.54 0 5.08 0 7.62 10.16 12.70 15.24 17.78 20.30 22.86 25.40 27.94 30.48 33.02 35.56 38.10 40.64 43.18 45.72 48.26 yes b rohs 0 2.24 0 4.78 0 7.32 0 9.86 12.40 14.94 17.48 20.02 22.56 25.10 27.64 30.18 32.72 35.26 37.80 40.34 42.88 45.42 47.96 50.50 k straight type part number a2- 0 1pa-2.54ds(71) a2- 0 2pa-2.54ds(71) a2- 0 3pa-2.54ds(71) a2- 0 4pa-2.54ds(71) a2- 0 5pa-2.54ds(71) a2- 0 6pa-2.54ds(71) a2- 0 7pa-2.54ds(71) a2- 0 8pa-2.54ds(71) a2- 0 9pa-2.54ds(71) a2-10pa-2.54ds(71) a2-11pa-2.54ds(71) a2-12pa-2.54ds(71) a2-13pa-2.54ds(71) a2-14pa-2.54ds(71) a2-15pa-2.54ds(71) a2-16pa-2.54ds(71) a2-17pa-2.54ds(71) a2-18pa-2.54ds(71) a2-19pa-2.54ds(71) a2-20pa-2.54ds(71) cl no. 620-0001-7-71 620-0002-0-71 620-0003-2-71 620-0004-5-71 620-0005-8-71 620-0006-0-71 620-0007-3-71 620-0008-6-71 620-0009-9-71 620-0010-8-71 620-0011-0-71 620-0012-3-71 620-0013-6-71 620-0014-9-71 620-0015-1-71 620-0016-4-71 620-0017-7-71 620-0018-0-71 620-0019-2-71 620-0020-1-71 number of contacts 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 a b rohs 0 2.24 0 4.78 0 7.32 0 9.86 12.40 14.94 17.48 20.02 22.56 25.10 27.64 30.18 32.72 35.26 37.80 40.34 42.88 45.42 47.96 50.50 ? 0 2.54 0 5.08 0 7.62 10.16 12.70 15.24 17.78 20.30 22.86 25.40 27.94 30.48 33.02 35.56 38.10 40.64 43.18 45.72 48.26 yes k right angle type k straight type k right angle type unit: mm unit: mm b pcb mounting pattern 2.540.05 b0.1 ?0.8 +0.1 0 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c7 a1 and a2 series 2.54mm pitch high density connector crimping socket k double row type k single row type part number a1- 0 8d-2.54c a1-10d-2.54c a1-12d-2.54c cl no. 619-0093-5 619-0091-0 619-0092-2 a b rohs 10.16 12.70 15.24 0 7.62 10.16 12.70 yes a1- * d-2.54c part number a2-5s-2.54c a2-6s-2.54c cl no. 620-0101-1 620-0102-4 a b rohs 12.70 15.24 10.16 12.70 yes a2- * s-2.54c the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c8 a1 and a2 series 2.54mm pitch high density connector crimping contact polarizing key crimping tools manual crimping tool crimper unit applicator hif3-tb2226hc hif3-tb2630hc cm-105 ap105-a1-2226s ap105-a1-2630s 550-0154-1 550-0155-4 901-0005-4 901-4008-4 901-4009-7 a1-2226scc a1-2630scc ????????? a1-2226scfc a1-2630scfc awg#22 to #26 awg#26 to #30 ????????? ????????? ????????? part number part number cl no. applicable contact applicable cable a1-2226scfc a1-2226scc a1-2630scfc a1-2630scc cl no. 619-0211-0 619-0214-8 619-0212-2 619-0215-0 applicable cable awg # 22 to # 26 awg # 26 to # 30 1.80 1.80 1.35 1.35 1.8 1.8 1.4 1.4 0.8 0.8 0.8 0.8 a b c d e f rohs 11.5 11.5 11.5 11.5 quantity 10,000 100 10,000 100 packaging type reel bag reel bag 2.3 2.3 2.0 2.0 2.6 2.6 2.1 2.1 yes scc contact hif3-gpin ( a ) scfc contact part number hif3-gpin(a) cl no. 562-0126-6 material remarks poly acetal (white) 5 pieces set packaging rohs 4 sets yes gold plated area gold plated area the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. powered by tcpdf (www.tcpdf.org) c9 a1 and a2 series 2.54mm pitch high density connector short pin performance part number hif3ga-2.54sp cl no. rohs 562-0403-4 yes item contact resistance insulation resistance current rating rating value 30m ohms max. at 0.1a dc 1000m ohms min. at 500v dc 3a the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c2 2.54mm pitch high density connector a1 and a2 series features 1. high density mounting connectors are aligned in the longitudinal direction on the 2.54 mm mesh board, so that no idle space can occur. 2. variation in number of contacts the a1 series contains 16 types of 6 to 64 contacts, while the a2 series contains 20 types of 1 to 20 contacts, 3. compatibility the a1 series is compatible with hif3b series cable side and hif3h receptacle for wide applications. note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. ? 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7 . operating life contact resistance: 15m ohms max. 500 cycles 8 . resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 350? for 3 seconds applications computers, vtr, and other various kinds of electronic equipment product specifications current rating: 3a voltage rating: 200v ac operating temperature range: -55 to +85 ? (note 1) operating moisture range: 40 to 80% storage temperature range: -10 to +60 ? (note 2) storage humidity range: 40 to 70% (note 2) rating material part material finish remarks insulator pbt black ul94v-0 pin header contact brass contact area : gold plated ??????? dip area : tin plated crimping socket polyamid black ul94v-0 crimping contact phosphor bronze contact area : gold plated ??????? termination area : nickel plated the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c3 a1 and a2 series 2.54mm pitch high density connector ordering information q series name: a w series no.:1 (double row) 2 (single row) e number of contacts: a1...6, 8, 10, 12, 14, 16, 20, 24, 26, 34, 40, 50, 60, 64 a2...1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 r p: pin header t a: selective gold plated y contact pitch : 2.54mm u contact type: ds : right angle type dsa : straight type k pin header a 1 - 6 p a - 2.54 ds qr e wt y q series name : a w series no. : 1 (double row) 2 (single row) e number of contacts: a1 : 8, 10, 12 a2 : 5, 6 r contact alignment : a1 : d (double row) a2 : s (single row) t contact pitch : 2.54mm y connection type: c : crimping k crimping socket a 1 - 12 d - 2.54 c qt er wy q series name : a w series no. : 1 e applicable cable size 2226: awg#22~ awg#26 2630: awg#26~ awg#30 r packaging type scfc : reel scc : bag k crimping contact a 1 - 2630 - scfc q er w u the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c4 a1 and a2 series 2.54mm pitch high density connector a1 (double row)- right angle type b pcb mounting pattern part number cl no. unit: mm a1- 0 6pa-2.54ds(71) a1- 0 8pa-2.54ds(71) a1-10pa-2.54ds(71) a1-12pa-2.54ds(71) a1-14pa-2.54ds(71) a1-16pa-2.54ds(71) a1-18pa-2.54ds(71) a1-20pa-2.54ds(71) 619-0001-7-71 619-0016-4-71 619-0002-0-71 619-0003-2-71 619-0004-5-71 619-0005-8-71 619-0006-0-71 619-0007-3-71 6 8 10 12 14 16 18 20 0 7.62 10.16 12.70 15.24 17.78 20.32 22.86 25.40 0 5.08 0 7.62 10.16 12.70 15.24 17.78 20.32 22.86 yes number of contacts a b rohs part number cl no. unit: mm a1-26pa-2.54ds (71) a1-30pa-2.54ds (71) a1-34pa-2.54ds (71) a1-40pa-2.54ds (71) a1-50pa-2.54ds (71) a1-60pa-2.54ds (71) a1-64pa-2.54ds (71) 619-0009-9-71 619-0010-8-71 619-0011-0-71 619-0012-3-71 619-0013-6-71 619-0014-9-71 619-0015-1-71 26 30 34 40 50 60 64 33.02 38.10 43.18 50.80 63.50 76.20 81.28 number of contacts a 30.48 35.56 40.64 48.26 60.96 73.66 78.74 yes b rohs note: right side and left side rib is added for 34pos, or more. 2.540.05 b0.1 2.540.05 ?0.8 +0.1 0 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c5 a1 and a2 series 2.54mm pitch high density connector a1 (double row)- straight type b pcb mounting pattern 2.540.05 b0.1 2.540.05 ?0.8 +0.1 0 unit: mm part number a1- 0 6pa-2.54dsa(71) a1- 0 8pa-2.54dsa(71) a1-10pa-2.54dsa(71) a1-12pa-2.54dsa(71) a1-14pa-2.54dsa(71) a1-16pa-2.54dsa(71) a1-18pa-2.54dsa(71) a1-20pa-2.54dsa(71) a1-24pa-2.54dsa(71) a1-26pa-2.54dsa(71) a1-30pa-2.54dsa(71) a1-34pa-2.54dsa(71) a1-40pa-2.54dsa(71) a1-50pa-2.54dsa(71) a1-60pa-2.54dsa(71) a1-64pa-2.54dsa(71) cl no. 619-0021-4-71 619-0037-4-71 619-0022-7-71 619-0023-0-71 619-0024-2-71 619-0025-5-71 619-0026-8-71 619-0027-0-71 619-0028-3-71 619-0029-6-71 619-0030-5-71 619-0031-8-71 619-0032-0-71 619-0033-3-71 619-0034-6-71 619-0035-9-71 number of contacts a 6 8 10 12 14 16 18 20 24 26 30 34 40 50 60 64 0 7.32 0 9.86 12.40 14.94 17.48 20.02 22.56 25.10 30.18 32.72 37.80 42.88 50.50 63.20 75.9 0 80.98 b rohs 0 5.08 0 7.62 10.16 12.70 15.24 17.78 20.32 22.86 27.94 30.48 35.56 40.64 48.26 60.96 73.66 78.74 yes the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c6 a1 and a2 series 2.54mm pitch high density connector a2 (single row)-dip type part number a2- 0 1pa-2.54dsa(71) a2- 0 2pa-2.54dsa(71) a2- 0 3pa-2.54dsa(71) a2- 0 4pa-2.54dsa(71) a2- 0 5pa-2.54dsa(71) a2- 0 6pa-2.54dsa(71) a2- 0 7pa-2.54dsa(71) a2- 0 8pa-2.54dsa(71) a2- 0 9pa-2.54dsa(71) a2-10pa-2.54dsa(71) a2-11pa-2.54dsa(71) a2-12pa-2.54dsa(71) a2-13pa-2.54dsa(71) a2-14pa-2.54dsa(71) a2-15pa-2.54dsa(71) a2-16pa-2.54dsa(71) a2-17pa-2.54dsa(71) a2-18pa-2.54dsa(71) a2-19pa-2.54dsa(71) a2-20pa-2.54dsa(71) cl no. 620-0051-5-71 620-0052-8-71 620-0053-0-71 620-0054-3-71 620-0055-6-71 620-0056-9-71 620-0057-1-71 620-0058-4-71 620-0059-7-71 620-0060-6-71 620-0061-9-71 620-0062-1-71 620-0063-4-71 620-0064-7-71 620-0065-0-71 620-0066-2-71 620-0067-5-71 620-0068-8-71 620-0069-0-71 620-0070-0-71 number of contacts 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 a ? 0 2.54 0 5.08 0 7.62 10.16 12.70 15.24 17.78 20.30 22.86 25.40 27.94 30.48 33.02 35.56 38.10 40.64 43.18 45.72 48.26 yes b rohs 0 2.24 0 4.78 0 7.32 0 9.86 12.40 14.94 17.48 20.02 22.56 25.10 27.64 30.18 32.72 35.26 37.80 40.34 42.88 45.42 47.96 50.50 k straight type part number a2- 0 1pa-2.54ds(71) a2- 0 2pa-2.54ds(71) a2- 0 3pa-2.54ds(71) a2- 0 4pa-2.54ds(71) a2- 0 5pa-2.54ds(71) a2- 0 6pa-2.54ds(71) a2- 0 7pa-2.54ds(71) a2- 0 8pa-2.54ds(71) a2- 0 9pa-2.54ds(71) a2-10pa-2.54ds(71) a2-11pa-2.54ds(71) a2-12pa-2.54ds(71) a2-13pa-2.54ds(71) a2-14pa-2.54ds(71) a2-15pa-2.54ds(71) a2-16pa-2.54ds(71) a2-17pa-2.54ds(71) a2-18pa-2.54ds(71) a2-19pa-2.54ds(71) a2-20pa-2.54ds(71) cl no. 620-0001-7-71 620-0002-0-71 620-0003-2-71 620-0004-5-71 620-0005-8-71 620-0006-0-71 620-0007-3-71 620-0008-6-71 620-0009-9-71 620-0010-8-71 620-0011-0-71 620-0012-3-71 620-0013-6-71 620-0014-9-71 620-0015-1-71 620-0016-4-71 620-0017-7-71 620-0018-0-71 620-0019-2-71 620-0020-1-71 number of contacts 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 a b rohs 0 2.24 0 4.78 0 7.32 0 9.86 12.40 14.94 17.48 20.02 22.56 25.10 27.64 30.18 32.72 35.26 37.80 40.34 42.88 45.42 47.96 50.50 ? 0 2.54 0 5.08 0 7.62 10.16 12.70 15.24 17.78 20.30 22.86 25.40 27.94 30.48 33.02 35.56 38.10 40.64 43.18 45.72 48.26 yes k right angle type k straight type k right angle type unit: mm unit: mm b pcb mounting pattern 2.540.05 b0.1 ?0.8 +0.1 0 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c7 a1 and a2 series 2.54mm pitch high density connector crimping socket k double row type k single row type part number a1- 0 8d-2.54c a1-10d-2.54c a1-12d-2.54c cl no. 619-0093-5 619-0091-0 619-0092-2 a b rohs 10.16 12.70 15.24 0 7.62 10.16 12.70 yes a1- * d-2.54c part number a2-5s-2.54c a2-6s-2.54c cl no. 620-0101-1 620-0102-4 a b rohs 12.70 15.24 10.16 12.70 yes a2- * s-2.54c the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c8 a1 and a2 series 2.54mm pitch high density connector crimping contact polarizing key crimping tools manual crimping tool crimper unit applicator hif3-tb2226hc hif3-tb2630hc cm-105 ap105-a1-2226s ap105-a1-2630s 550-0154-1 550-0155-4 901-0005-4 901-4008-4 901-4009-7 a1-2226scc a1-2630scc ????????? a1-2226scfc a1-2630scfc awg#22 to #26 awg#26 to #30 ????????? ????????? ????????? part number part number cl no. applicable contact applicable cable a1-2226scfc a1-2226scc a1-2630scfc a1-2630scc cl no. 619-0211-0 619-0214-8 619-0212-2 619-0215-0 applicable cable awg # 22 to # 26 awg # 26 to # 30 1.80 1.80 1.35 1.35 1.8 1.8 1.4 1.4 0.8 0.8 0.8 0.8 a b c d e f rohs 11.5 11.5 11.5 11.5 quantity 10,000 100 10,000 100 packaging type reel bag reel bag 2.3 2.3 2.0 2.0 2.6 2.6 2.1 2.1 yes scc contact hif3-gpin ( a ) scfc contact part number hif3-gpin(a) cl no. 562-0126-6 material remarks poly acetal (white) 5 pieces set packaging rohs 4 sets yes gold plated area gold plated area the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. powered by tcpdf (www.tcpdf.org) c9 a1 and a2 series 2.54mm pitch high density connector short pin performance part number hif3ga-2.54sp cl no. rohs 562-0403-4 yes item contact resistance insulation resistance current rating rating value 30m ohms max. at 0.1a dc 1000m ohms min. at 500v dc 3a the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c2 2.54mm pitch high density connector a1 and a2 series features 1. high density mounting connectors are aligned in the longitudinal direction on the 2.54 mm mesh board, so that no idle space can occur. 2. variation in number of contacts the a1 series contains 16 types of 6 to 64 contacts, while the a2 series contains 20 types of 1 to 20 contacts, 3. compatibility the a1 series is compatible with hif3b series cable side and hif3h receptacle for wide applications. note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. ? 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7 . operating life contact resistance: 15m ohms max. 500 cycles 8 . resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 350? for 3 seconds applications computers, vtr, and other various kinds of electronic equipment product specifications current rating: 3a voltage rating: 200v ac operating temperature range: -55 to +85 ? (note 1) operating moisture range: 40 to 80% storage temperature range: -10 to +60 ? (note 2) storage humidity range: 40 to 70% (note 2) rating material part material finish remarks insulator pbt black ul94v-0 pin header contact brass contact area : gold plated ??????? dip area : tin plated crimping socket polyamid black ul94v-0 crimping contact phosphor bronze contact area : gold plated ??????? termination area : nickel plated the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c3 a1 and a2 series 2.54mm pitch high density connector ordering information q series name: a w series no.:1 (double row) 2 (single row) e number of contacts: a1...6, 8, 10, 12, 14, 16, 20, 24, 26, 34, 40, 50, 60, 64 a2...1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 r p: pin header t a: selective gold plated y contact pitch : 2.54mm u contact type: ds : right angle type dsa : straight type k pin header a 1 - 6 p a - 2.54 ds qr e wt y q series name : a w series no. : 1 (double row) 2 (single row) e number of contacts: a1 : 8, 10, 12 a2 : 5, 6 r contact alignment : a1 : d (double row) a2 : s (single row) t contact pitch : 2.54mm y connection type: c : crimping k crimping socket a 1 - 12 d - 2.54 c qt er wy q series name : a w series no. : 1 e applicable cable size 2226: awg#22~ awg#26 2630: awg#26~ awg#30 r packaging type scfc : reel scc : bag k crimping contact a 1 - 2630 - scfc q er w u the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c4 a1 and a2 series 2.54mm pitch high density connector a1 (double row)- right angle type b pcb mounting pattern part number cl no. unit: mm a1- 0 6pa-2.54ds(71) a1- 0 8pa-2.54ds(71) a1-10pa-2.54ds(71) a1-12pa-2.54ds(71) a1-14pa-2.54ds(71) a1-16pa-2.54ds(71) a1-18pa-2.54ds(71) a1-20pa-2.54ds(71) 619-0001-7-71 619-0016-4-71 619-0002-0-71 619-0003-2-71 619-0004-5-71 619-0005-8-71 619-0006-0-71 619-0007-3-71 6 8 10 12 14 16 18 20 0 7.62 10.16 12.70 15.24 17.78 20.32 22.86 25.40 0 5.08 0 7.62 10.16 12.70 15.24 17.78 20.32 22.86 yes number of contacts a b rohs part number cl no. unit: mm a1-26pa-2.54ds (71) a1-30pa-2.54ds (71) a1-34pa-2.54ds (71) a1-40pa-2.54ds (71) a1-50pa-2.54ds (71) a1-60pa-2.54ds (71) a1-64pa-2.54ds (71) 619-0009-9-71 619-0010-8-71 619-0011-0-71 619-0012-3-71 619-0013-6-71 619-0014-9-71 619-0015-1-71 26 30 34 40 50 60 64 33.02 38.10 43.18 50.80 63.50 76.20 81.28 number of contacts a 30.48 35.56 40.64 48.26 60.96 73.66 78.74 yes b rohs note: right side and left side rib is added for 34pos, or more. 2.540.05 b0.1 2.540.05 ?0.8 +0.1 0 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c5 a1 and a2 series 2.54mm pitch high density connector a1 (double row)- straight type b pcb mounting pattern 2.540.05 b0.1 2.540.05 ?0.8 +0.1 0 unit: mm part number a1- 0 6pa-2.54dsa(71) a1- 0 8pa-2.54dsa(71) a1-10pa-2.54dsa(71) a1-12pa-2.54dsa(71) a1-14pa-2.54dsa(71) a1-16pa-2.54dsa(71) a1-18pa-2.54dsa(71) a1-20pa-2.54dsa(71) a1-24pa-2.54dsa(71) a1-26pa-2.54dsa(71) a1-30pa-2.54dsa(71) a1-34pa-2.54dsa(71) a1-40pa-2.54dsa(71) a1-50pa-2.54dsa(71) a1-60pa-2.54dsa(71) a1-64pa-2.54dsa(71) cl no. 619-0021-4-71 619-0037-4-71 619-0022-7-71 619-0023-0-71 619-0024-2-71 619-0025-5-71 619-0026-8-71 619-0027-0-71 619-0028-3-71 619-0029-6-71 619-0030-5-71 619-0031-8-71 619-0032-0-71 619-0033-3-71 619-0034-6-71 619-0035-9-71 number of contacts a 6 8 10 12 14 16 18 20 24 26 30 34 40 50 60 64 0 7.32 0 9.86 12.40 14.94 17.48 20.02 22.56 25.10 30.18 32.72 37.80 42.88 50.50 63.20 75.9 0 80.98 b rohs 0 5.08 0 7.62 10.16 12.70 15.24 17.78 20.32 22.86 27.94 30.48 35.56 40.64 48.26 60.96 73.66 78.74 yes the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c6 a1 and a2 series 2.54mm pitch high density connector a2 (single row)-dip type part number a2- 0 1pa-2.54dsa(71) a2- 0 2pa-2.54dsa(71) a2- 0 3pa-2.54dsa(71) a2- 0 4pa-2.54dsa(71) a2- 0 5pa-2.54dsa(71) a2- 0 6pa-2.54dsa(71) a2- 0 7pa-2.54dsa(71) a2- 0 8pa-2.54dsa(71) a2- 0 9pa-2.54dsa(71) a2-10pa-2.54dsa(71) a2-11pa-2.54dsa(71) a2-12pa-2.54dsa(71) a2-13pa-2.54dsa(71) a2-14pa-2.54dsa(71) a2-15pa-2.54dsa(71) a2-16pa-2.54dsa(71) a2-17pa-2.54dsa(71) a2-18pa-2.54dsa(71) a2-19pa-2.54dsa(71) a2-20pa-2.54dsa(71) cl no. 620-0051-5-71 620-0052-8-71 620-0053-0-71 620-0054-3-71 620-0055-6-71 620-0056-9-71 620-0057-1-71 620-0058-4-71 620-0059-7-71 620-0060-6-71 620-0061-9-71 620-0062-1-71 620-0063-4-71 620-0064-7-71 620-0065-0-71 620-0066-2-71 620-0067-5-71 620-0068-8-71 620-0069-0-71 620-0070-0-71 number of contacts 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 a ? 0 2.54 0 5.08 0 7.62 10.16 12.70 15.24 17.78 20.30 22.86 25.40 27.94 30.48 33.02 35.56 38.10 40.64 43.18 45.72 48.26 yes b rohs 0 2.24 0 4.78 0 7.32 0 9.86 12.40 14.94 17.48 20.02 22.56 25.10 27.64 30.18 32.72 35.26 37.80 40.34 42.88 45.42 47.96 50.50 k straight type part number a2- 0 1pa-2.54ds(71) a2- 0 2pa-2.54ds(71) a2- 0 3pa-2.54ds(71) a2- 0 4pa-2.54ds(71) a2- 0 5pa-2.54ds(71) a2- 0 6pa-2.54ds(71) a2- 0 7pa-2.54ds(71) a2- 0 8pa-2.54ds(71) a2- 0 9pa-2.54ds(71) a2-10pa-2.54ds(71) a2-11pa-2.54ds(71) a2-12pa-2.54ds(71) a2-13pa-2.54ds(71) a2-14pa-2.54ds(71) a2-15pa-2.54ds(71) a2-16pa-2.54ds(71) a2-17pa-2.54ds(71) a2-18pa-2.54ds(71) a2-19pa-2.54ds(71) a2-20pa-2.54ds(71) cl no. 620-0001-7-71 620-0002-0-71 620-0003-2-71 620-0004-5-71 620-0005-8-71 620-0006-0-71 620-0007-3-71 620-0008-6-71 620-0009-9-71 620-0010-8-71 620-0011-0-71 620-0012-3-71 620-0013-6-71 620-0014-9-71 620-0015-1-71 620-0016-4-71 620-0017-7-71 620-0018-0-71 620-0019-2-71 620-0020-1-71 number of contacts 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 a b rohs 0 2.24 0 4.78 0 7.32 0 9.86 12.40 14.94 17.48 20.02 22.56 25.10 27.64 30.18 32.72 35.26 37.80 40.34 42.88 45.42 47.96 50.50 ? 0 2.54 0 5.08 0 7.62 10.16 12.70 15.24 17.78 20.30 22.86 25.40 27.94 30.48 33.02 35.56 38.10 40.64 43.18 45.72 48.26 yes k right angle type k straight type k right angle type unit: mm unit: mm b pcb mounting pattern 2.540.05 b0.1 ?0.8 +0.1 0 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c7 a1 and a2 series 2.54mm pitch high density connector crimping socket k double row type k single row type part number a1- 0 8d-2.54c a1-10d-2.54c a1-12d-2.54c cl no. 619-0093-5 619-0091-0 619-0092-2 a b rohs 10.16 12.70 15.24 0 7.62 10.16 12.70 yes a1- * d-2.54c part number a2-5s-2.54c a2-6s-2.54c cl no. 620-0101-1 620-0102-4 a b rohs 12.70 15.24 10.16 12.70 yes a2- * s-2.54c the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c8 a1 and a2 series 2.54mm pitch high density connector crimping contact polarizing key crimping tools manual crimping tool crimper unit applicator hif3-tb2226hc hif3-tb2630hc cm-105 ap105-a1-2226s ap105-a1-2630s 550-0154-1 550-0155-4 901-0005-4 901-4008-4 901-4009-7 a1-2226scc a1-2630scc ????????? a1-2226scfc a1-2630scfc awg#22 to #26 awg#26 to #30 ????????? ????????? ????????? part number part number cl no. applicable contact applicable cable a1-2226scfc a1-2226scc a1-2630scfc a1-2630scc cl no. 619-0211-0 619-0214-8 619-0212-2 619-0215-0 applicable cable awg # 22 to # 26 awg # 26 to # 30 1.80 1.80 1.35 1.35 1.8 1.8 1.4 1.4 0.8 0.8 0.8 0.8 a b c d e f rohs 11.5 11.5 11.5 11.5 quantity 10,000 100 10,000 100 packaging type reel bag reel bag 2.3 2.3 2.0 2.0 2.6 2.6 2.1 2.1 yes scc contact hif3-gpin ( a ) scfc contact part number hif3-gpin(a) cl no. 562-0126-6 material remarks poly acetal (white) 5 pieces set packaging rohs 4 sets yes gold plated area gold plated area the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. powered by tcpdf (www.tcpdf.org) c9 a1 and a2 series 2.54mm pitch high density connector short pin performance part number hif3ga-2.54sp cl no. rohs 562-0403-4 yes item contact resistance insulation resistance current rating rating value 30m ohms max. at 0.1a dc 1000m ohms min. at 500v dc 3a the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c2 2.54mm pitch high density connector a1 and a2 series features 1. high density mounting connectors are aligned in the longitudinal direction on the 2.54 mm mesh board, so that no idle space can occur. 2. variation in number of contacts the a1 series contains 16 types of 6 to 64 contacts, while the a2 series contains 20 types of 1 to 20 contacts, 3. compatibility the a1 series is compatible with hif3b series cable side and hif3h receptacle for wide applications. note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. ? 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7 . operating life contact resistance: 15m ohms max. 500 cycles 8 . resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 350? for 3 seconds applications computers, vtr, and other various kinds of electronic equipment product specifications current rating: 3a voltage rating: 200v ac operating temperature range: -55 to +85 ? (note 1) operating moisture range: 40 to 80% storage temperature range: -10 to +60 ? (note 2) storage humidity range: 40 to 70% (note 2) rating material part material finish remarks insulator pbt black ul94v-0 pin header contact brass contact area : gold plated ??????? dip area : tin plated crimping socket polyamid black ul94v-0 crimping contact phosphor bronze contact area : gold plated ??????? termination area : nickel plated the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c3 a1 and a2 series 2.54mm pitch high density connector ordering information q series name: a w series no.:1 (double row) 2 (single row) e number of contacts: a1...6, 8, 10, 12, 14, 16, 20, 24, 26, 34, 40, 50, 60, 64 a2...1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 r p: pin header t a: selective gold plated y contact pitch : 2.54mm u contact type: ds : right angle type dsa : straight type k pin header a 1 - 6 p a - 2.54 ds qr e wt y q series name : a w series no. : 1 (double row) 2 (single row) e number of contacts: a1 : 8, 10, 12 a2 : 5, 6 r contact alignment : a1 : d (double row) a2 : s (single row) t contact pitch : 2.54mm y connection type: c : crimping k crimping socket a 1 - 12 d - 2.54 c qt er wy q series name : a w series no. : 1 e applicable cable size 2226: awg#22~ awg#26 2630: awg#26~ awg#30 r packaging type scfc : reel scc : bag k crimping contact a 1 - 2630 - scfc q er w u the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c4 a1 and a2 series 2.54mm pitch high density connector a1 (double row)- right angle type b pcb mounting pattern part number cl no. unit: mm a1- 0 6pa-2.54ds(71) a1- 0 8pa-2.54ds(71) a1-10pa-2.54ds(71) a1-12pa-2.54ds(71) a1-14pa-2.54ds(71) a1-16pa-2.54ds(71) a1-18pa-2.54ds(71) a1-20pa-2.54ds(71) 619-0001-7-71 619-0016-4-71 619-0002-0-71 619-0003-2-71 619-0004-5-71 619-0005-8-71 619-0006-0-71 619-0007-3-71 6 8 10 12 14 16 18 20 0 7.62 10.16 12.70 15.24 17.78 20.32 22.86 25.40 0 5.08 0 7.62 10.16 12.70 15.24 17.78 20.32 22.86 yes number of contacts a b rohs part number cl no. unit: mm a1-26pa-2.54ds (71) a1-30pa-2.54ds (71) a1-34pa-2.54ds (71) a1-40pa-2.54ds (71) a1-50pa-2.54ds (71) a1-60pa-2.54ds (71) a1-64pa-2.54ds (71) 619-0009-9-71 619-0010-8-71 619-0011-0-71 619-0012-3-71 619-0013-6-71 619-0014-9-71 619-0015-1-71 26 30 34 40 50 60 64 33.02 38.10 43.18 50.80 63.50 76.20 81.28 number of contacts a 30.48 35.56 40.64 48.26 60.96 73.66 78.74 yes b rohs note: right side and left side rib is added for 34pos, or more. 2.540.05 b0.1 2.540.05 ?0.8 +0.1 0 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c5 a1 and a2 series 2.54mm pitch high density connector a1 (double row)- straight type b pcb mounting pattern 2.540.05 b0.1 2.540.05 ?0.8 +0.1 0 unit: mm part number a1- 0 6pa-2.54dsa(71) a1- 0 8pa-2.54dsa(71) a1-10pa-2.54dsa(71) a1-12pa-2.54dsa(71) a1-14pa-2.54dsa(71) a1-16pa-2.54dsa(71) a1-18pa-2.54dsa(71) a1-20pa-2.54dsa(71) a1-24pa-2.54dsa(71) a1-26pa-2.54dsa(71) a1-30pa-2.54dsa(71) a1-34pa-2.54dsa(71) a1-40pa-2.54dsa(71) a1-50pa-2.54dsa(71) a1-60pa-2.54dsa(71) a1-64pa-2.54dsa(71) cl no. 619-0021-4-71 619-0037-4-71 619-0022-7-71 619-0023-0-71 619-0024-2-71 619-0025-5-71 619-0026-8-71 619-0027-0-71 619-0028-3-71 619-0029-6-71 619-0030-5-71 619-0031-8-71 619-0032-0-71 619-0033-3-71 619-0034-6-71 619-0035-9-71 number of contacts a 6 8 10 12 14 16 18 20 24 26 30 34 40 50 60 64 0 7.32 0 9.86 12.40 14.94 17.48 20.02 22.56 25.10 30.18 32.72 37.80 42.88 50.50 63.20 75.9 0 80.98 b rohs 0 5.08 0 7.62 10.16 12.70 15.24 17.78 20.32 22.86 27.94 30.48 35.56 40.64 48.26 60.96 73.66 78.74 yes the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c6 a1 and a2 series 2.54mm pitch high density connector a2 (single row)-dip type part number a2- 0 1pa-2.54dsa(71) a2- 0 2pa-2.54dsa(71) a2- 0 3pa-2.54dsa(71) a2- 0 4pa-2.54dsa(71) a2- 0 5pa-2.54dsa(71) a2- 0 6pa-2.54dsa(71) a2- 0 7pa-2.54dsa(71) a2- 0 8pa-2.54dsa(71) a2- 0 9pa-2.54dsa(71) a2-10pa-2.54dsa(71) a2-11pa-2.54dsa(71) a2-12pa-2.54dsa(71) a2-13pa-2.54dsa(71) a2-14pa-2.54dsa(71) a2-15pa-2.54dsa(71) a2-16pa-2.54dsa(71) a2-17pa-2.54dsa(71) a2-18pa-2.54dsa(71) a2-19pa-2.54dsa(71) a2-20pa-2.54dsa(71) cl no. 620-0051-5-71 620-0052-8-71 620-0053-0-71 620-0054-3-71 620-0055-6-71 620-0056-9-71 620-0057-1-71 620-0058-4-71 620-0059-7-71 620-0060-6-71 620-0061-9-71 620-0062-1-71 620-0063-4-71 620-0064-7-71 620-0065-0-71 620-0066-2-71 620-0067-5-71 620-0068-8-71 620-0069-0-71 620-0070-0-71 number of contacts 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 a ? 0 2.54 0 5.08 0 7.62 10.16 12.70 15.24 17.78 20.30 22.86 25.40 27.94 30.48 33.02 35.56 38.10 40.64 43.18 45.72 48.26 yes b rohs 0 2.24 0 4.78 0 7.32 0 9.86 12.40 14.94 17.48 20.02 22.56 25.10 27.64 30.18 32.72 35.26 37.80 40.34 42.88 45.42 47.96 50.50 k straight type part number a2- 0 1pa-2.54ds(71) a2- 0 2pa-2.54ds(71) a2- 0 3pa-2.54ds(71) a2- 0 4pa-2.54ds(71) a2- 0 5pa-2.54ds(71) a2- 0 6pa-2.54ds(71) a2- 0 7pa-2.54ds(71) a2- 0 8pa-2.54ds(71) a2- 0 9pa-2.54ds(71) a2-10pa-2.54ds(71) a2-11pa-2.54ds(71) a2-12pa-2.54ds(71) a2-13pa-2.54ds(71) a2-14pa-2.54ds(71) a2-15pa-2.54ds(71) a2-16pa-2.54ds(71) a2-17pa-2.54ds(71) a2-18pa-2.54ds(71) a2-19pa-2.54ds(71) a2-20pa-2.54ds(71) cl no. 620-0001-7-71 620-0002-0-71 620-0003-2-71 620-0004-5-71 620-0005-8-71 620-0006-0-71 620-0007-3-71 620-0008-6-71 620-0009-9-71 620-0010-8-71 620-0011-0-71 620-0012-3-71 620-0013-6-71 620-0014-9-71 620-0015-1-71 620-0016-4-71 620-0017-7-71 620-0018-0-71 620-0019-2-71 620-0020-1-71 number of contacts 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 a b rohs 0 2.24 0 4.78 0 7.32 0 9.86 12.40 14.94 17.48 20.02 22.56 25.10 27.64 30.18 32.72 35.26 37.80 40.34 42.88 45.42 47.96 50.50 ? 0 2.54 0 5.08 0 7.62 10.16 12.70 15.24 17.78 20.30 22.86 25.40 27.94 30.48 33.02 35.56 38.10 40.64 43.18 45.72 48.26 yes k right angle type k straight type k right angle type unit: mm unit: mm b pcb mounting pattern 2.540.05 b0.1 ?0.8 +0.1 0 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c7 a1 and a2 series 2.54mm pitch high density connector crimping socket k double row type k single row type part number a1- 0 8d-2.54c a1-10d-2.54c a1-12d-2.54c cl no. 619-0093-5 619-0091-0 619-0092-2 a b rohs 10.16 12.70 15.24 0 7.62 10.16 12.70 yes a1- * d-2.54c part number a2-5s-2.54c a2-6s-2.54c cl no. 620-0101-1 620-0102-4 a b rohs 12.70 15.24 10.16 12.70 yes a2- * s-2.54c the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c8 a1 and a2 series 2.54mm pitch high density connector crimping contact polarizing key crimping tools manual crimping tool crimper unit applicator hif3-tb2226hc hif3-tb2630hc cm-105 ap105-a1-2226s ap105-a1-2630s 550-0154-1 550-0155-4 901-0005-4 901-4008-4 901-4009-7 a1-2226scc a1-2630scc ????????? a1-2226scfc a1-2630scfc awg#22 to #26 awg#26 to #30 ????????? ????????? ????????? part number part number cl no. applicable contact applicable cable a1-2226scfc a1-2226scc a1-2630scfc a1-2630scc cl no. 619-0211-0 619-0214-8 619-0212-2 619-0215-0 applicable cable awg # 22 to # 26 awg # 26 to # 30 1.80 1.80 1.35 1.35 1.8 1.8 1.4 1.4 0.8 0.8 0.8 0.8 a b c d e f rohs 11.5 11.5 11.5 11.5 quantity 10,000 100 10,000 100 packaging type reel bag reel bag 2.3 2.3 2.0 2.0 2.6 2.6 2.1 2.1 yes scc contact hif3-gpin ( a ) scfc contact part number hif3-gpin(a) cl no. 562-0126-6 material remarks poly acetal (white) 5 pieces set packaging rohs 4 sets yes gold plated area gold plated area the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. powered by tcpdf (www.tcpdf.org) c9 a1 and a2 series 2.54mm pitch high density connector short pin performance part number hif3ga-2.54sp cl no. rohs 562-0403-4 yes item contact resistance insulation resistance current rating rating value 30m ohms max. at 0.1a dc 1000m ohms min. at 500v dc 3a the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c2 2.54mm pitch high density connector a1 and a2 series features 1. high density mounting connectors are aligned in the longitudinal direction on the 2.54 mm mesh board, so that no idle space can occur. 2. variation in number of contacts the a1 series contains 16 types of 6 to 64 contacts, while the a2 series contains 20 types of 1 to 20 contacts, 3. compatibility the a1 series is compatible with hif3b series cable side and hif3h receptacle for wide applications. note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. ? 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7 . operating life contact resistance: 15m ohms max. 500 cycles 8 . resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 350? for 3 seconds applications computers, vtr, and other various kinds of electronic equipment product specifications current rating: 3a voltage rating: 200v ac operating temperature range: -55 to +85 ? (note 1) operating moisture range: 40 to 80% storage temperature range: -10 to +60 ? (note 2) storage humidity range: 40 to 70% (note 2) rating material part material finish remarks insulator pbt black ul94v-0 pin header contact brass contact area : gold plated ??????? dip area : tin plated crimping socket polyamid black ul94v-0 crimping contact phosphor bronze contact area : gold plated ??????? termination area : nickel plated the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c3 a1 and a2 series 2.54mm pitch high density connector ordering information q series name: a w series no.:1 (double row) 2 (single row) e number of contacts: a1...6, 8, 10, 12, 14, 16, 20, 24, 26, 34, 40, 50, 60, 64 a2...1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 r p: pin header t a: selective gold plated y contact pitch : 2.54mm u contact type: ds : right angle type dsa : straight type k pin header a 1 - 6 p a - 2.54 ds qr e wt y q series name : a w series no. : 1 (double row) 2 (single row) e number of contacts: a1 : 8, 10, 12 a2 : 5, 6 r contact alignment : a1 : d (double row) a2 : s (single row) t contact pitch : 2.54mm y connection type: c : crimping k crimping socket a 1 - 12 d - 2.54 c qt er wy q series name : a w series no. : 1 e applicable cable size 2226: awg#22~ awg#26 2630: awg#26~ awg#30 r packaging type scfc : reel scc : bag k crimping contact a 1 - 2630 - scfc q er w u the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c4 a1 and a2 series 2.54mm pitch high density connector a1 (double row)- right angle type b pcb mounting pattern part number cl no. unit: mm a1- 0 6pa-2.54ds(71) a1- 0 8pa-2.54ds(71) a1-10pa-2.54ds(71) a1-12pa-2.54ds(71) a1-14pa-2.54ds(71) a1-16pa-2.54ds(71) a1-18pa-2.54ds(71) a1-20pa-2.54ds(71) 619-0001-7-71 619-0016-4-71 619-0002-0-71 619-0003-2-71 619-0004-5-71 619-0005-8-71 619-0006-0-71 619-0007-3-71 6 8 10 12 14 16 18 20 0 7.62 10.16 12.70 15.24 17.78 20.32 22.86 25.40 0 5.08 0 7.62 10.16 12.70 15.24 17.78 20.32 22.86 yes number of contacts a b rohs part number cl no. unit: mm a1-26pa-2.54ds (71) a1-30pa-2.54ds (71) a1-34pa-2.54ds (71) a1-40pa-2.54ds (71) a1-50pa-2.54ds (71) a1-60pa-2.54ds (71) a1-64pa-2.54ds (71) 619-0009-9-71 619-0010-8-71 619-0011-0-71 619-0012-3-71 619-0013-6-71 619-0014-9-71 619-0015-1-71 26 30 34 40 50 60 64 33.02 38.10 43.18 50.80 63.50 76.20 81.28 number of contacts a 30.48 35.56 40.64 48.26 60.96 73.66 78.74 yes b rohs note: right side and left side rib is added for 34pos, or more. 2.540.05 b0.1 2.540.05 ?0.8 +0.1 0 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c5 a1 and a2 series 2.54mm pitch high density connector a1 (double row)- straight type b pcb mounting pattern 2.540.05 b0.1 2.540.05 ?0.8 +0.1 0 unit: mm part number a1- 0 6pa-2.54dsa(71) a1- 0 8pa-2.54dsa(71) a1-10pa-2.54dsa(71) a1-12pa-2.54dsa(71) a1-14pa-2.54dsa(71) a1-16pa-2.54dsa(71) a1-18pa-2.54dsa(71) a1-20pa-2.54dsa(71) a1-24pa-2.54dsa(71) a1-26pa-2.54dsa(71) a1-30pa-2.54dsa(71) a1-34pa-2.54dsa(71) a1-40pa-2.54dsa(71) a1-50pa-2.54dsa(71) a1-60pa-2.54dsa(71) a1-64pa-2.54dsa(71) cl no. 619-0021-4-71 619-0037-4-71 619-0022-7-71 619-0023-0-71 619-0024-2-71 619-0025-5-71 619-0026-8-71 619-0027-0-71 619-0028-3-71 619-0029-6-71 619-0030-5-71 619-0031-8-71 619-0032-0-71 619-0033-3-71 619-0034-6-71 619-0035-9-71 number of contacts a 6 8 10 12 14 16 18 20 24 26 30 34 40 50 60 64 0 7.32 0 9.86 12.40 14.94 17.48 20.02 22.56 25.10 30.18 32.72 37.80 42.88 50.50 63.20 75.9 0 80.98 b rohs 0 5.08 0 7.62 10.16 12.70 15.24 17.78 20.32 22.86 27.94 30.48 35.56 40.64 48.26 60.96 73.66 78.74 yes the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c6 a1 and a2 series 2.54mm pitch high density connector a2 (single row)-dip type part number a2- 0 1pa-2.54dsa(71) a2- 0 2pa-2.54dsa(71) a2- 0 3pa-2.54dsa(71) a2- 0 4pa-2.54dsa(71) a2- 0 5pa-2.54dsa(71) a2- 0 6pa-2.54dsa(71) a2- 0 7pa-2.54dsa(71) a2- 0 8pa-2.54dsa(71) a2- 0 9pa-2.54dsa(71) a2-10pa-2.54dsa(71) a2-11pa-2.54dsa(71) a2-12pa-2.54dsa(71) a2-13pa-2.54dsa(71) a2-14pa-2.54dsa(71) a2-15pa-2.54dsa(71) a2-16pa-2.54dsa(71) a2-17pa-2.54dsa(71) a2-18pa-2.54dsa(71) a2-19pa-2.54dsa(71) a2-20pa-2.54dsa(71) cl no. 620-0051-5-71 620-0052-8-71 620-0053-0-71 620-0054-3-71 620-0055-6-71 620-0056-9-71 620-0057-1-71 620-0058-4-71 620-0059-7-71 620-0060-6-71 620-0061-9-71 620-0062-1-71 620-0063-4-71 620-0064-7-71 620-0065-0-71 620-0066-2-71 620-0067-5-71 620-0068-8-71 620-0069-0-71 620-0070-0-71 number of contacts 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 a ? 0 2.54 0 5.08 0 7.62 10.16 12.70 15.24 17.78 20.30 22.86 25.40 27.94 30.48 33.02 35.56 38.10 40.64 43.18 45.72 48.26 yes b rohs 0 2.24 0 4.78 0 7.32 0 9.86 12.40 14.94 17.48 20.02 22.56 25.10 27.64 30.18 32.72 35.26 37.80 40.34 42.88 45.42 47.96 50.50 k straight type part number a2- 0 1pa-2.54ds(71) a2- 0 2pa-2.54ds(71) a2- 0 3pa-2.54ds(71) a2- 0 4pa-2.54ds(71) a2- 0 5pa-2.54ds(71) a2- 0 6pa-2.54ds(71) a2- 0 7pa-2.54ds(71) a2- 0 8pa-2.54ds(71) a2- 0 9pa-2.54ds(71) a2-10pa-2.54ds(71) a2-11pa-2.54ds(71) a2-12pa-2.54ds(71) a2-13pa-2.54ds(71) a2-14pa-2.54ds(71) a2-15pa-2.54ds(71) a2-16pa-2.54ds(71) a2-17pa-2.54ds(71) a2-18pa-2.54ds(71) a2-19pa-2.54ds(71) a2-20pa-2.54ds(71) cl no. 620-0001-7-71 620-0002-0-71 620-0003-2-71 620-0004-5-71 620-0005-8-71 620-0006-0-71 620-0007-3-71 620-0008-6-71 620-0009-9-71 620-0010-8-71 620-0011-0-71 620-0012-3-71 620-0013-6-71 620-0014-9-71 620-0015-1-71 620-0016-4-71 620-0017-7-71 620-0018-0-71 620-0019-2-71 620-0020-1-71 number of contacts 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 a b rohs 0 2.24 0 4.78 0 7.32 0 9.86 12.40 14.94 17.48 20.02 22.56 25.10 27.64 30.18 32.72 35.26 37.80 40.34 42.88 45.42 47.96 50.50 ? 0 2.54 0 5.08 0 7.62 10.16 12.70 15.24 17.78 20.30 22.86 25.40 27.94 30.48 33.02 35.56 38.10 40.64 43.18 45.72 48.26 yes k right angle type k straight type k right angle type unit: mm unit: mm b pcb mounting pattern 2.540.05 b0.1 ?0.8 +0.1 0 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c7 a1 and a2 series 2.54mm pitch high density connector crimping socket k double row type k single row type part number a1- 0 8d-2.54c a1-10d-2.54c a1-12d-2.54c cl no. 619-0093-5 619-0091-0 619-0092-2 a b rohs 10.16 12.70 15.24 0 7.62 10.16 12.70 yes a1- * d-2.54c part number a2-5s-2.54c a2-6s-2.54c cl no. 620-0101-1 620-0102-4 a b rohs 12.70 15.24 10.16 12.70 yes a2- * s-2.54c the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c8 a1 and a2 series 2.54mm pitch high density connector crimping contact polarizing key crimping tools manual crimping tool crimper unit applicator hif3-tb2226hc hif3-tb2630hc cm-105 ap105-a1-2226s ap105-a1-2630s 550-0154-1 550-0155-4 901-0005-4 901-4008-4 901-4009-7 a1-2226scc a1-2630scc ????????? a1-2226scfc a1-2630scfc awg#22 to #26 awg#26 to #30 ????????? ????????? ????????? part number part number cl no. applicable contact applicable cable a1-2226scfc a1-2226scc a1-2630scfc a1-2630scc cl no. 619-0211-0 619-0214-8 619-0212-2 619-0215-0 applicable cable awg # 22 to # 26 awg # 26 to # 30 1.80 1.80 1.35 1.35 1.8 1.8 1.4 1.4 0.8 0.8 0.8 0.8 a b c d e f rohs 11.5 11.5 11.5 11.5 quantity 10,000 100 10,000 100 packaging type reel bag reel bag 2.3 2.3 2.0 2.0 2.6 2.6 2.1 2.1 yes scc contact hif3-gpin ( a ) scfc contact part number hif3-gpin(a) cl no. 562-0126-6 material remarks poly acetal (white) 5 pieces set packaging rohs 4 sets yes gold plated area gold plated area the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. powered by tcpdf (www.tcpdf.org) c9 a1 and a2 series 2.54mm pitch high density connector short pin performance part number hif3ga-2.54sp cl no. rohs 562-0403-4 yes item contact resistance insulation resistance current rating rating value 30m ohms max. at 0.1a dc 1000m ohms min. at 500v dc 3a the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. powered by tcpdf (www.tcpdf.org) nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c2 2.54mm pitch high density connector a1 and a2 series features 1. high density mounting connectors are aligned in the longitudinal direction on the 2.54 mm mesh board, so that no idle space can occur. 2. variation in number of contacts the a1 series contains 16 types of 6 to 64 contacts, while the a2 series contains 20 types of 1 to 20 contacts, 3. compatibility the a1 series is compatible with hif3b series cable side and hif3h receptacle for wide applications. note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. ? 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7 . operating life contact resistance: 15m ohms max. 500 cycles 8 . resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 350? for 3 seconds applications computers, vtr, and other various kinds of electronic equipment product specifications current rating: 3a voltage rating: 200v ac operating temperature range: -55 to +85 ? (note 1) operating moisture range: 40 to 80% storage temperature range: -10 to +60 ? (note 2) storage humidity range: 40 to 70% (note 2) rating material part material finish remarks insulator pbt black ul94v-0 pin header contact brass contact area : gold plated ??????? dip area : tin plated crimping socket polyamid black ul94v-0 crimping contact phosphor bronze contact area : gold plated ??????? termination area : nickel plated the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c3 a1 and a2 series 2.54mm pitch high density connector ordering information q series name: a w series no.:1 (double row) 2 (single row) e number of contacts: a1...6, 8, 10, 12, 14, 16, 20, 24, 26, 34, 40, 50, 60, 64 a2...1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 r p: pin header t a: selective gold plated y contact pitch : 2.54mm u contact type: ds : right angle type dsa : straight type k pin header a 1 - 6 p a - 2.54 ds qr e wt y q series name : a w series no. : 1 (double row) 2 (single row) e number of contacts: a1 : 8, 10, 12 a2 : 5, 6 r contact alignment : a1 : d (double row) a2 : s (single row) t contact pitch : 2.54mm y connection type: c : crimping k crimping socket a 1 - 12 d - 2.54 c qt er wy q series name : a w series no. : 1 e applicable cable size 2226: awg#22~ awg#26 2630: awg#26~ awg#30 r packaging type scfc : reel scc : bag k crimping contact a 1 - 2630 - scfc q er w u the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c4 a1 and a2 series 2.54mm pitch high density connector a1 (double row)- right angle type b pcb mounting pattern part number cl no. unit: mm a1- 0 6pa-2.54ds(71) a1- 0 8pa-2.54ds(71) a1-10pa-2.54ds(71) a1-12pa-2.54ds(71) a1-14pa-2.54ds(71) a1-16pa-2.54ds(71) a1-18pa-2.54ds(71) a1-20pa-2.54ds(71) 619-0001-7-71 619-0016-4-71 619-0002-0-71 619-0003-2-71 619-0004-5-71 619-0005-8-71 619-0006-0-71 619-0007-3-71 6 8 10 12 14 16 18 20 0 7.62 10.16 12.70 15.24 17.78 20.32 22.86 25.40 0 5.08 0 7.62 10.16 12.70 15.24 17.78 20.32 22.86 yes number of contacts a b rohs part number cl no. unit: mm a1-26pa-2.54ds (71) a1-30pa-2.54ds (71) a1-34pa-2.54ds (71) a1-40pa-2.54ds (71) a1-50pa-2.54ds (71) a1-60pa-2.54ds (71) a1-64pa-2.54ds (71) 619-0009-9-71 619-0010-8-71 619-0011-0-71 619-0012-3-71 619-0013-6-71 619-0014-9-71 619-0015-1-71 26 30 34 40 50 60 64 33.02 38.10 43.18 50.80 63.50 76.20 81.28 number of contacts a 30.48 35.56 40.64 48.26 60.96 73.66 78.74 yes b rohs note: right side and left side rib is added for 34pos, or more. 2.540.05 b0.1 2.540.05 ?0.8 +0.1 0 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c5 a1 and a2 series 2.54mm pitch high density connector a1 (double row)- straight type b pcb mounting pattern 2.540.05 b0.1 2.540.05 ?0.8 +0.1 0 unit: mm part number a1- 0 6pa-2.54dsa(71) a1- 0 8pa-2.54dsa(71) a1-10pa-2.54dsa(71) a1-12pa-2.54dsa(71) a1-14pa-2.54dsa(71) a1-16pa-2.54dsa(71) a1-18pa-2.54dsa(71) a1-20pa-2.54dsa(71) a1-24pa-2.54dsa(71) a1-26pa-2.54dsa(71) a1-30pa-2.54dsa(71) a1-34pa-2.54dsa(71) a1-40pa-2.54dsa(71) a1-50pa-2.54dsa(71) a1-60pa-2.54dsa(71) a1-64pa-2.54dsa(71) cl no. 619-0021-4-71 619-0037-4-71 619-0022-7-71 619-0023-0-71 619-0024-2-71 619-0025-5-71 619-0026-8-71 619-0027-0-71 619-0028-3-71 619-0029-6-71 619-0030-5-71 619-0031-8-71 619-0032-0-71 619-0033-3-71 619-0034-6-71 619-0035-9-71 number of contacts a 6 8 10 12 14 16 18 20 24 26 30 34 40 50 60 64 0 7.32 0 9.86 12.40 14.94 17.48 20.02 22.56 25.10 30.18 32.72 37.80 42.88 50.50 63.20 75.9 0 80.98 b rohs 0 5.08 0 7.62 10.16 12.70 15.24 17.78 20.32 22.86 27.94 30.48 35.56 40.64 48.26 60.96 73.66 78.74 yes the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c6 a1 and a2 series 2.54mm pitch high density connector a2 (single row)-dip type part number a2- 0 1pa-2.54dsa(71) a2- 0 2pa-2.54dsa(71) a2- 0 3pa-2.54dsa(71) a2- 0 4pa-2.54dsa(71) a2- 0 5pa-2.54dsa(71) a2- 0 6pa-2.54dsa(71) a2- 0 7pa-2.54dsa(71) a2- 0 8pa-2.54dsa(71) a2- 0 9pa-2.54dsa(71) a2-10pa-2.54dsa(71) a2-11pa-2.54dsa(71) a2-12pa-2.54dsa(71) a2-13pa-2.54dsa(71) a2-14pa-2.54dsa(71) a2-15pa-2.54dsa(71) a2-16pa-2.54dsa(71) a2-17pa-2.54dsa(71) a2-18pa-2.54dsa(71) a2-19pa-2.54dsa(71) a2-20pa-2.54dsa(71) cl no. 620-0051-5-71 620-0052-8-71 620-0053-0-71 620-0054-3-71 620-0055-6-71 620-0056-9-71 620-0057-1-71 620-0058-4-71 620-0059-7-71 620-0060-6-71 620-0061-9-71 620-0062-1-71 620-0063-4-71 620-0064-7-71 620-0065-0-71 620-0066-2-71 620-0067-5-71 620-0068-8-71 620-0069-0-71 620-0070-0-71 number of contacts 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 a ? 0 2.54 0 5.08 0 7.62 10.16 12.70 15.24 17.78 20.30 22.86 25.40 27.94 30.48 33.02 35.56 38.10 40.64 43.18 45.72 48.26 yes b rohs 0 2.24 0 4.78 0 7.32 0 9.86 12.40 14.94 17.48 20.02 22.56 25.10 27.64 30.18 32.72 35.26 37.80 40.34 42.88 45.42 47.96 50.50 k straight type part number a2- 0 1pa-2.54ds(71) a2- 0 2pa-2.54ds(71) a2- 0 3pa-2.54ds(71) a2- 0 4pa-2.54ds(71) a2- 0 5pa-2.54ds(71) a2- 0 6pa-2.54ds(71) a2- 0 7pa-2.54ds(71) a2- 0 8pa-2.54ds(71) a2- 0 9pa-2.54ds(71) a2-10pa-2.54ds(71) a2-11pa-2.54ds(71) a2-12pa-2.54ds(71) a2-13pa-2.54ds(71) a2-14pa-2.54ds(71) a2-15pa-2.54ds(71) a2-16pa-2.54ds(71) a2-17pa-2.54ds(71) a2-18pa-2.54ds(71) a2-19pa-2.54ds(71) a2-20pa-2.54ds(71) cl no. 620-0001-7-71 620-0002-0-71 620-0003-2-71 620-0004-5-71 620-0005-8-71 620-0006-0-71 620-0007-3-71 620-0008-6-71 620-0009-9-71 620-0010-8-71 620-0011-0-71 620-0012-3-71 620-0013-6-71 620-0014-9-71 620-0015-1-71 620-0016-4-71 620-0017-7-71 620-0018-0-71 620-0019-2-71 620-0020-1-71 number of contacts 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 a b rohs 0 2.24 0 4.78 0 7.32 0 9.86 12.40 14.94 17.48 20.02 22.56 25.10 27.64 30.18 32.72 35.26 37.80 40.34 42.88 45.42 47.96 50.50 ? 0 2.54 0 5.08 0 7.62 10.16 12.70 15.24 17.78 20.30 22.86 25.40 27.94 30.48 33.02 35.56 38.10 40.64 43.18 45.72 48.26 yes k right angle type k straight type k right angle type unit: mm unit: mm b pcb mounting pattern 2.540.05 b0.1 ?0.8 +0.1 0 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c7 a1 and a2 series 2.54mm pitch high density connector crimping socket k double row type k single row type part number a1- 0 8d-2.54c a1-10d-2.54c a1-12d-2.54c cl no. 619-0093-5 619-0091-0 619-0092-2 a b rohs 10.16 12.70 15.24 0 7.62 10.16 12.70 yes a1- * d-2.54c part number a2-5s-2.54c a2-6s-2.54c cl no. 620-0101-1 620-0102-4 a b rohs 12.70 15.24 10.16 12.70 yes a2- * s-2.54c the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. c8 a1 and a2 series 2.54mm pitch high density connector crimping contact polarizing key crimping tools manual crimping tool crimper unit applicator hif3-tb2226hc hif3-tb2630hc cm-105 ap105-a1-2226s ap105-a1-2630s 550-0154-1 550-0155-4 901-0005-4 901-4008-4 901-4009-7 a1-2226scc a1-2630scc ????????? a1-2226scfc a1-2630scfc awg#22 to #26 awg#26 to #30 ????????? ????????? ????????? part number part number cl no. applicable contact applicable cable a1-2226scfc a1-2226scc a1-2630scfc a1-2630scc cl no. 619-0211-0 619-0214-8 619-0212-2 619-0215-0 applicable cable awg # 22 to # 26 awg # 26 to # 30 1.80 1.80 1.35 1.35 1.8 1.8 1.4 1.4 0.8 0.8 0.8 0.8 a b c d e f rohs 11.5 11.5 11.5 11.5 quantity 10,000 100 10,000 100 packaging type reel bag reel bag 2.3 2.3 2.0 2.0 2.6 2.6 2.1 2.1 yes scc contact hif3-gpin ( a ) scfc contact part number hif3-gpin(a) cl no. 562-0126-6 material remarks poly acetal (white) 5 pieces set packaging rohs 4 sets yes gold plated area gold plated area the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. powered by tcpdf (www.tcpdf.org) c9 a1 and a2 series 2.54mm pitch high density connector short pin performance part number hif3ga-2.54sp cl no. rohs 562-0403-4 yes item contact resistance insulation resistance current rating rating value 30m ohms max. at 0.1a dc 1000m ohms min. at 500v dc 3a the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
|
